Ddr4 8gbx2 Matched-pair Kingston

DDR4 Matched-Pair Kingston 8GBx2 = 16GB

Kingston KVR26N19S8/8

8GB 1Rx8 1G x 64-Bit PC4-2666

CL19 288-Pin DIMM (Desk Top)

*Power will vary depending on the SDRAM used.

JEDEC standard latency DDR4-2666 19-19-19 at 1.2V. 

Each 288-pin DIMM uses gold contact fingers. 

CL(IDD) 19 cycles

Row Cycle Time (tRCmin) 45.75ns(min.)

Refresh to Active/Refresh 350ns(min.)

Command Time (tRFCmin) 

Row Active Time (tRASmin) 32ns(min.)

Maximum Operating Power TBD W*

UL Rating 94 V - 0

Operating Temperature 0 o C to +85 o C

Storage Temperature -55 o C to +100o C

• Power Supply: VDD=1.2V Typical

• VDDQ = 1.2V Typical

• VPP - 2.5V Typical

• VDDSPD=2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Single-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• 16 internal banks; 4 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• PCB: Height 1.23” (31.25mm)

• RoHS Compliant and Halogen-Free