Walkin' Wheels Dog Wheelchair

Large size. Used once, so effectively new. 

Frame is blue powder-coated aluminum so it will not bend, break, or rust. Wheel height and length of the frame can be adjusted.

The dog’s head goes between the blue and black straps of the front harness; the red strap goes under the dog’s front legs and clips onto the side of the harness. The shoulder pads are made of neoprene and keep the straps and buckles from causing discomfort for the dog. Comfort sleeves can be cut in half if they are too long.

Leg Rings: the dog’s hindquarters are held in place by the leg rings, or the rear harness support system. The leg rings can also be used as a lifting harness when out of the wheelchair by touch-fastening the excess strapping together to make handles on each side.

Struts & Foam Wheels: the struts are adjustable within a range of 3 inches and the foam wheels work on all terrains. The wheels have a dense foam interior with an outer rubber layer and will not puncture; they wear well, and are easy to clean.

Belly Belt: this helps support the dog’s back, particularly for dogs with a long back, overweight, elderly, with curvature of the spine, and/or with disc problems.

Stirrups: these hold the dog’s legs off the ground so they don’t drag due to paralysis, knuckling under, or foot injuries. If the dog doesn’t need them, they can be removed.

https://youtu.be/_r_XRe3Bx9s?list=TLGG6KcNlm9xDyEwNTExMjAyMw